氧化石墨烯改性碳纤维复合材料抗冲击行为研究

使用单层纳米氧化石墨烯（NGO）粒子对环氧树脂进行改性处理，采用真空辅助树脂传递模塑成型工艺制备了[±45/0/90]_2S铺层角度下的纯树脂及单层NGO改性碳纤维复合材料（CFRP）层合板。通过落锤冲击试验、超声C扫描检测、冲击后压缩试验等对纯树脂及单层NGO改性CFRP进行实验研究。结果表明，纯树脂及单层NGO改性CFRP在损伤阻抗及损伤容限实验中均存在拐点现象，且拐点出现在相同深度位置，其中纯树脂CFRP拐点位置为0.51 mm，单层NGO改性CFRP拐点位置为0.43 mm；相对于纯树脂CFRP，单层NGO改性CFRP可以显著提高复合材料的抗冲击性能及冲击后的压缩性能；通过对冲击后凹坑深度及凹坑面积进行数据模拟，可以用拟合公式实现对复合材料的损伤预测。     

加热工艺参数对12%Cr钢晶粒长大行为的影响

研究了不同加热工艺参数下(加热温度1050~1300 ℃,保温时间0.25~24 h)12%Cr超超临界转子钢的奥氏体晶粒长大行为,并通过光学显微镜(OM)观察晶粒尺寸的变化规律,建立晶粒长大数学模型。结果表明:随着加热温度增加,晶粒尺寸逐渐增加,加热温度低于1150 ℃时,晶粒尺寸增加明显,而温度高于1150 ℃后,晶粒尺寸逐渐趋于稳定;随着保温时间的增加,晶粒尺寸逐渐增加,保温时间增加到3 h后,晶粒尺寸增加趋势放缓。采用非线性回归方法和Arrhenius晶粒长大模型,建立了该钢的晶粒长大数学模型。     

高速列车转向架构架损伤、等效应力及寿命分布特性研究

为分析高速列车转向架构架损伤、等效应力及寿命分布特性，对构架疲劳关键测点进行动应力线路实测并对测点实测时域数据波形进行解析；基于实测应力时间历程及雨流计数法编制二维应力谱，利用Goodman等寿命方程将二维应力谱等效转换为一维应力谱；阐述线性累积损伤及非线性累积损伤模型的建立方法并对实测数据的线性累积损伤及非线性累积损伤进行了计算及对比分析；分别基于线性累积损伤理论及非线性累积损伤理论推导出各理论下的等效应力，基于实测数据对两种等效应力进行了计算及对比分析；通过结合非线性累积损伤及线性累积损伤理论计算的等效应力及不同可靠度下的材料S-N曲线计算并对比分析构架结构的疲劳寿命。研究结果表明，与非线性疲劳分析理论相比，线性疲劳分析理论对高速列车转向架构架的疲劳特性评估偏于保守。     

Smelling our appetite? The influence of food odors on congruent appetite,food preferences and intake

We are surrounded by sensory food cues, such as odors, that may trigger (un)conscious decisions and even lead to (over)eating, it is therefore crucial to better understand the effect of food odors on behavioral responses. Food odor exposure has been shown to enhance appetite for food products with similar properties: sensory-specific appetite. This suggests that based on previous encounters with foods, we have learned to detect the nutritional content of foods, through our sense of smell. We investigated the influence of aware exposure of macronutrient-related odors on various measures of eating behavior, in a cross-over intervention study. Thirty two normal-weight healthy and unrestrained Dutch females took part in five test sessions. On each test session, they were exposed to one of five conditions (active smelling of clearly noticeable odors representing food high in carbohydrates, protein, and fat, low in calories, and a no-odor condition for 3-min) and assessed on specific appetite, food preferences and intake. Odor exposure increased congruent appetite after protein-related odor exposure. Similarly, protein-related odor exposure influenced the liking for protein foods and the preference ranking for savory products. However, food intake was not affected by smelling congruent food odors. Together this indicates that exposure to (aware) food odors may mostly influence appetite, but does not impact subsequent food intake. Moreover, appetite seems to be triggered by taste qualities rather than macronutrient information of the food, as signaled by olfactory cues. Future studies should investigate the role of awareness in more detail, to fully understand how odors might be used to steer people towards healthier food choices.     

Point contact abrasive wear behavior of MAX phase materials

The room temperature abrasive wear behavior of three selected MAX phases, Ti₃SiC₂, solution strengthened Ti_2.7Zr_0.3SiC₂ and Cr₂AlC, is investigated by low velocity scratch testing using a diamond conical indentor with a final radius of 100 μm and a cone angle of 120° and applied loads of up to 20 N. All three materials showed a relatively low wear resistance in comparison to most engineering ceramics such as Al₂O_3, Si₃N₄ and SiC. For all three materials, the wear rate scaled more or less linearly with the applied load. The softer Ti₃SiC₂ with a hardness of 2.8 GPa showed the lowest wear resistance with extensive ploughing and grain breakout damage, both within and outside the direct wear track, in particular at the highest load. The hardest material, Ti_2.7Zr_0.3SiC₂, with a hardness of 7.3 GPa, showed a 5 times better wear resistance. The Cr₂AlC with a hardness of 4.8 GPa showed a wear resistance equal to or even better than that of the Ti_2.7Zr_0.3SiC₂. The wear mechanism depends on the applied load and the microstructure of the MAX phase materials tested. For the Ti₃SiC₂ sample, a quasi-plastic deformation behavior occurs below a point load of 10 N, resulting in grain bending, kink band formation and delamination, grain de-cohesion, as well as trans-and intra-granular fracture near the scratch groove. At this load, the Ti_2.7Zr_0.3SiC₂ and Cr₂AlC MAX samples display plastic ploughing, grain boundary cracks and material dislodgments.     

A miniature triaxial apparatus for investigating the micromechanics of granular soils with in situ X-ray micro-tomography scanning

The development of a miniature triaxial apparatus is presented. In conjunction with an X-ray micro-tomography (termed as X-ray μCT hereafter) facility and advanced image processing techniques, this apparatus can be used for in situ investigation of the micro-scale mechanical behavior of granular soils under shear. The apparatus allows for triaxial testing of a miniature dry sample with a size of \mathrm{8}\hspace{0.17em}\mathrm{mm}\times \mathrm{16}\hspace{0.17em}\mathrm{mm} (diameter \times height). In situ triaxial testing of a 0.4–0.8 mm Leighton Buzzard sand (LBS) under a constant confining pressure of 500 kPa is presented. The evolutions of local porosities (i.e., the porosities of regions associated with individual particles), particle kinematics (i.e., particle translation and particle rotation) of the sample during the shear are quantitatively studied using image processing and analysis techniques. Meanwhile, a novel method is presented to quantify the volumetric strain distribution of the sample based on the results of local porosities and particle tracking. It is found that the sample, with nearly homogenous initial local porosities, starts to exhibit obvious inhomogeneity of local porosities and localization of particle kinematics and volumetric strain around the peak of deviatoric stress. In the post-peak shear stage, large local porosities and volumetric dilation mainly occur in a localized band. The developed triaxial apparatus, in its combined use of X-ray μCT imaging techniques, is a powerful tool to investigate the micro-scale mechanical behavior of granular soils.     

AA7075高强铝合金热冲压流变行为本构模型对比研究

在热冲压过程中,AA7075高强铝合金板料经充分固溶后移入室温模具进行冲压成形并淬火。为表征AA7075铝合金在热冲压工艺中的变形行为,在温度200~480℃、应变速率0.01~10s-1范围内进行了高温拉伸试验。基于Arrhenius类型本构模型、Johnson-Cook模型以及Zerilli-Armstrong模型提出了多种修正本构模型,并应用实验所获流变曲线进行了拟合。提出的修正模型通过将模型参数表示为应变、应变速率及温度相关的多项式函数耦合了应变、应变速率及温度对流变应力的影响,并通过均方误差(MSE)以及相关系数R值对模型流变应力预测准确性进行了评价。结果表明,修正的Johnson-Cook模型能够更加准确的预测AA7075高温流变行为。     

Progressive fracture processes around tunnel triggered by blast disturbances under biaxial compression with different lateral pressure coefficients

To investigate the progressive fracture processes around a tunnel triggered by static stress and dynamic disturbance, experiments and numerical simulations were performed. The results show that the spatial distributions of acoustic emission (AE) events become very different as lateral pressure coefficients change. The combined effect of static stress and dynamic disturbance causes the damage around the tunnel, and initial stress conditions control the damage morphology. The blast disturbance cannot fundamentally change the damaged area but will deepen the extent of damage and accelerate the failure speed. The more significant the difference between the vertical and horizontal stresses is, the higher the impact on the tunnel by the dynamic disturbance is. The AE activity recovers to a relatively stable state within a short time after the blast and conforms to power-law characteristics.     

Characterization of the structure and diffusion behavior of calcium alginate gel beads

A simple and novel method using gel shrinkage to indirectly characterize the structure of calcium alginate gel (CAG) beads during the calcium alginate gelation process was presented in this study. The effect of preparation process parameters (gelling cations, bead diameter, and alginate M _w and concentration) on the structure of the CAG bead formation process was thoroughly investigated. It was found that (a) the concentration of the Na⁺ and Ca²⁺ ion in gel bath was found to be the determining factor in the gel structure formation process by regulating the dissociation of alginate and the complexation of the calcium; (b) Na⁺ acts as a competitor with calcium and a screen in the electrostatic repulsion; (c) the effect of beads size below 700 μm on the structure of CAG beads can be neglected; and (d) the sodium alginate concentration has no significant effect on the gel formation process. Furthermore, the diffusion of bovine serum albumin (BSA) was controlled by the density of CAG bead. Consequently, a faster diffusion rate of BSA within the looser structure of beads can be observed. These results are keys to understanding the behavior and performance of beads in their utilization medium. © 2020 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48923.     

Electrical and mechanical properties of BZT − xBCT lead-free piezoceramics

In this study, lead-free (1 − x)Ba(Zr_0.2Ti_0.8)O₃ − x(Ba_0.7Ca_0.3)TiO₃ compositions are synthesized via conventional solid oxide route, and the ceramics are fabricated with normal sintering in air. The effects of composition fluctuations on dielectric, piezoelectric, and mechanical properties are investigated. The phase structure and the microstructure are analyzed with X-ray diffraction and scanning electron microscopy. The best dielectric and piezoelectric properties of ε_r = 11 207 and d₃₃ = 330 pC/N were obtained for BZT−0.35BCT and BZT−0.5BCT ceramics, respectively. The mechanical behavior—in terms of Vickers hardness and compressive and flexural strengths—was investigated, and the best mechanical behavior was found in the vicinity of the phase transition boundary with x values between 0.5 and 0.6.